This post is my take on sensor noise vs sensor size, this is not a scientific experiment, more of an understanding of how a sensor’s size has an impact on noise (Luminance and Chrominance) across ISO settings when the exposure is either under or over. I have produced this mainly for the purpose of deciding if I can work with the 1″ sensor and full frame, and ditch the Four Thirds kit.
I have used several cameras for this testing, with sensor sizes from full frame, APS-C, Four Thirds and 1″, with the following cameras.
All of the cameras were set to Program Mode, with Matrix or equivalent metering, and auto white balance. The images captured starting at the base ISO for the camera (for both the Olympus and Fujifilm the base ISO is 200) and then increasing the ISO one stop up to ISO 3200, I then bracketed the exposure by plus and minus 3 stops. The RAW files were then imported into Lightroom with default settings with no sharpening or noise reduction applied, I obviously had to correct the exposure compensation by adding or subtracting the 3 stops. All of the images were then exported to jpegs for sharing with this blog page.
For information, all of the images were captured indoors on a cloudy day with diffused light through the window blinds. The reason I chose to use two types of camera with an APS-C sensor, was to see if there was any difference between the Bayer and the X-Trans array.
I would also add that in real life situations the noise may not be apparent in the image, or some may find it adds to the image, it really depends on the subjects matter or type of photography that you follow. Continue reading
Nigel Burley Photography 